General Specifications
DMX512 channels are updated exactly at the same rate as the network media output rate. The powerful ARM processor guarantees the transfer of up to 40 FPS without any delay or frame loss over the ethernet network.
DMX CC4s can be used as a DMX master controller. The mode, scenario, and scenario speed configuration can be performed by the user via buttons and the display on the device. In master mode, the decoder also drives the LEDs connected to its output according to its DMX address.
DMX Address, device operation mode, scenario type, scenario speed, and gamma correction values can be set easily via user buttons and display located on top of the decoder.
DMX CC4s provides three current drive options 350, 500, and 700 milliamperes (ma). Drive current selection should be done in the order since these options are individually supported.
Supports remote device management (RDM) protocol. With an RDM controller, the user is able to set/read the address of DMX CC4s without physically reaching the device.
Gamma correction is applied to DMX data. LEDs are driven with gamma-corrected color values. This unique capability makes the decoder suitable for facade lighting applications. The gamma correction value can be set by the user via buttons and display on the device.
The slim mechanical case simplifies mounting and cabling within the body or outside of the luminaire.
Top View
